Checklists

Step-by-step launch, retrieve, towing, and seasonal checklists — with your progress saved in this browser.

Tap each item as you do it. Your progress is saved on this device so you can pick up where you left off.

Launch

Bilge plug is in and tightKey in / lanyard clipped onSafety gear aboard (PFDs, extinguisher, horn)Fuel — enough for the trip, vent openEngine trimmed for launchCast-off lines clearEveryone has a fitted lifejacketThrottle / gear in neutral

Retrieve

Approach the ramp slowKill the engine in neutralTilt / trim the engine upPull the bilge plug at the rampTie down the boat to the trailerTake gear off and stowFlush the engine (freshwater) if used in saltCover the boat

Towing

Safety chains crossed under the couplerCoupler locked to the ball — verify the pinTrailer lights workingBreakaway lanyard connectedTires at correct pressure + spare onboardLoad balanced on the trailer (10% tongue)Straps and winch securedBoat plug and tie-downs left in

Spring Prep

Charge the battery, clean terminalsCheck / replace the impellerInspect fuel lines and primer bulbChange lower-unit gear oilNew spark plugs if dueRun on muffs — check the tell-taleCheck trailer lights and bearingsRefresh the safety-gear kit

Winterization

Add fuel stabilizer and run it throughFog the engineDrain water systems (block, livewell, ballast)Change lower-unit gear oilRemove and store the battery on a maintainerProtect the outside — cover or indoor storage